Baumatic Dishwasher Error Codes

We get asked what Baumatic dishwasher fault codes mean so often that we thought we’d put up a guide listing all the common ones to try and help you understand what your much loved machine is trying to tell you!

Please remember that whilst we’ve done our best to include all the common fault codes, we may have missed one or two or the codes may mean something different for certain specific models.

Baumatic Dishwasher Fault Codes

Error CodeCause
E1No fill
E2No drain
E3NTC/Element fault
E4Overfilling
E5Cannot switch off automatically- programme not finishing (not for BDW 13, 14 or 15)
E6Open circuit Thermistor
E7Short circuit Thermistor

So there you have it, the most common Baumatic dishwasher fault codes which will hopefully help you fix your dishwasher at home yourself. If however you’re experiencing a different problem to the ones listed above, or simply would like some assistance, book one of our qualified Service Engineers by clicking below.

Book Your Repair

Comments

Simon Shimell
Sunday, June 16, 2024 at 10:15 am

EL code on dishwasher?

Casey Hewer
Monday, January 6, 2025 at 12:00 pm

Thank you for your message. The EL error code on a dishwasher typically indicates a fault with the water supply, such as a problem with the water inlet valve or a blockage in the hose. It could also point to an issue with the electrical system or the control board.

To start, check that the water supply is fully on and inspect the hose for any kinks or blockages. If the water supply appears fine, the problem may lie with the valve or the control system, which would require an engineer’s expertise to diagnose and repair.

Let me know if you’d like help arranging a visit!

Leave a Reply

Categories

Archives