- |
-
- |
Beko Washing Machine Error Codes
- Home /
- News & Advice /
- Beko Washing Machine Error Codes
- September 29th, 2020
- No Comments
- Posted in fault codes
Is your Beko Washing Machine displaying error codes which you are unsure of? If the answer is yes, we have put together a list with all the fault codes along with the explanations of what could be wrong with your washing machine.
| Error Code | Fault Description |
|---|---|
| C9 | Indicates an imbalance during a spin cycle. |
| F9 | Indicates an imbalance during a spin cycle. |
| E10 | Indicates problems with taking in water, not taken in enough water or problems with the drain. |
| E11 | Indicates problems with taking in water, not taken in enough water or problems with the drain. |
| C1 | Indicates problems with taking in water, not taken in enough water or problems with the drain. |
| E30 | The error is caused by water at the bottom or inside the machine. |
| C3 | The error is caused by water at the bottom or inside the machine. |
| E40 | The appliance door / lid is open or not closed correctly, the appliance is overloaded, the door lock is faulty. |
| E41 | The appliance door / lid is open or not closed correctly, the appliance is overloaded, the door lock is faulty. |
| E60 (or any code beginning with E6) | It generally refers to a heating problem with the machine. |
| E80 or emits 8 flashes | Indicates that the cycle selector was set incorrectly, or the washing machine possibly started with the cycle selector set halfway between two wash cycles. |
| E90, E91, E92, E93 or E94 | It indicates configuration / communication problems with the electronic parts. |
| EAO | Error message EA0 indicates DPS (Drum Position Sensor) fault. |
| EA0 | Error message EA0 indicates DPS (Drum Position Sensor) fault. |
| Eb0 | It may indicate problems with the too low voltage of the power supply. |
| Ebo | It may indicate problems with the too low voltage of the power supply. |
| EF0, EFo, EF3 | Use less detergent. |
| EHO / EH0 | Indicates a problem with the power supply. |
| EH1 | Frequency of power supply out of range. |
| EH2 | Supply voltage too high. |
| EH3 | Supply voltage too low. |
| E20 | Indicates pumping problems. Washing machine does not drain, the drum does not turn, the appliance makes an unusual noise because of the blockage of the drain pump. |
| E21 | Indicates pumping problems. Washing machine does not drain, the drum does not turn, the appliance makes an unusual noise because of the blockage of the drain pump. |
| C2 | Indicates pumping problems. Washing machine does not drain, the drum does not turn, the appliance makes an unusual noise because of the blockage of the drain pump. |
If you are continuing to have issues with your washing machine, then please be sure to contact Glotech Repairs to organise an appointment with our qualified engineers. Some repairs need to be carried out by a trained professional, so if you are about to attempt a repair yourself, please be extremely careful and only do so if you are qualified.
Leave a Reply