- |
-
- |
BOSCH Washing Machine Error Codes
- Home /
- News & Advice /
- BOSCH Washing Machine Error Codes
- February 14th, 2022
- 4 Comments
- Posted in dishwashing, fault codes
If your Bosch washing machine has started to show an error code which you are unfamiliar with, then look no further. Glotech have put together an extensive list for your to understand what the error codes mean and to understand the issues with your appliance.
| Error Code | Fault |
|---|---|
| E16 / F16 | The door is open or not locked properly. |
| E17 / F17 | There is no water supply to the tank. |
| E18 / F18 | Indicate a pump blockage or kinked drain hose. |
| E19 / F19 | Indicate heating system faults involving heating circuits, heating elements or the thermostat. |
| E20 / F20 | Indicate heating system faults involving heating circuits, heating elements or the thermostat. |
| E23 / F23 | The washing machine is leaking or there is water in the base plate. |
| E25 / F25 | The turbidity sensor is faulty. |
| E26 / F26 | The analogue pressure sensor is faulty. |
| F27 | Indicates the pressure sensor is faulty. |
| E28 / F28 | Indicate the flow sensor is faulty. |
| E33 | Excess foam has been detected. |
If you are continuing to have issues with your Washing Machine, then please be sure to contact Glotech Repairs to organise an appointment with our qualified engineers. Some repairs need to be carried out by a trained professional, so if you are about to attempt a repair yourself, please be extremely careful and only do so if you are qualified.
Comments
Robert
Wednesday, December 18, 2024 at 11:29 amMiele W1 twin dos xl&wificonn@ct
Error code “waterproofing”
Looked on google said “flood switch activated”
It said to tilt machine back 45degrees to drain water I have and machine was ok for two weeks now same fault and this time a lot of water came out. Question do I have a blocked pipe?
Casey Hewer
Friday, December 20, 2024 at 2:01 pmThe “Waterproofing” error on your Miele W1 indicates water has collected in the base, likely due to a leak or blockage. Since tilting the machine temporarily resolved the issue, potential causes include a clogged drain or filter, a leaking hose, overuse of detergent, or a faulty component. Check and clean the drain pump, hoses, and lint filter. Inspect for loose or damaged connections. Avoid overloading and ensure correct detergent use. If the issue persists after these steps, it may require professional service to address an internal leak or faulty part. Keep the machine unplugged if water continues to collect. Please call us on 03330152609 if you require an engineer.
Casey Hewer
Monday, December 23, 2024 at 10:36 amThank you for reaching out. The E36 error code on your washing machine typically indicates a fault with the water-level sensor or pressure switch. This could be due to a blockage in the pressure system, a faulty sensor, or an issue with the control board.
You can check for blockages in the pressure hose or clean the filter, but further diagnosis requires specialized tools.
We recommend booking an engineer to accurately identify and resolve the issue. Let us know if you’d like to arrange this, and we’ll be happy to help!
Leave a Reply
Claire Johnson
Thursday, November 14, 2024 at 9:19 pmWhat is the e36 mean on my washing machine