Indesit Error Codes

The following are error codes or fault codes for hundreds of Indesit appliances, including washing machines, tumble dryers, fridge freezers, and dishwashers. As we have direct accounts with Indesit as a manufacturer, we have access to lots of error code information that isn’t generally publically available.

Washing machines and washer dryers

Fridges

Dishwashers

LCD dishwashers

LCD tumble dryers

LCD EVO1 washing machines and washer dryers

LCD EVO2 and V4 washing machines and washer dryers

Tumble dryers

Identifying error codes

If your machine has a digital display, like most modern Indesit appliances do, error codes will be shown on the display. They’re represented by a letter followed by two numbers. This code will help you to find out what’s wrong with your machine, but not necessarily how to fix it.

Find out what’s wrong with your appliance below.

Fault codes for Indesit washing machines and washer dryers

  • F10 – No cold fill. Check that the taps are on or if the drain hoses are kinked.
  • F11 – No hot fill. The ambient temperature is likely to be below freezing possibly due to the pipes being frozen. Also check that the taps are on or if the drain hoses are kinked.
  • F12 – No mixed fill. It is likely that the water is not turned on at the taps.
  • F13 – Check the water supply, inlet valve and hot and cold hose connections.
  • F14 – A fault with the water indesheating has occurred.
  • F15 – Water is not being pumped out and a flood condition could occur. Check that the drainage hose is raised to the recommended minimum height and that the pipe is not blocked.
  • F16 – Extremely high water level. Disconnect or turn off the water supply and ensure that the water level does not rise any more.
  • F17 – Door not closed properly. Close door firmly at the 3 o’clock position.
  • F20, F21 – The thermistor resistance has drifted or the temperature scanning sequence is incorrect. The ambient temperature could be below freezing.
  • F30, F31 – A motor drive problem has occurred. Try running the programme again.
  • F40 – Water below protection level during a heat step.
  • F41 – Water level detect sequence incorrect.
  • F50, F51 – Customer language and wash programme have not been saved. The system will run with default conditions (1000rpm max and English language). Book an indesit service engineer to reprogramme your product.

Fault codes for Indesit fridges

  • F1 – Freezer thermistor open circuit.
  • F2 – Freezer thermistor short circuit.
  • F3 – Fridge thermistor open circuit.
  • F4 – Fridge thermistor short circuit.
  • F7 – Evaporator thermistor open circuit.
  • F8 – Evaporator thermistor short circuit.
  • F9 – Temperature set switch open circuit.
  • FA – No feedback from Baffle.
  • FB – Fridge Baffle motor operating continuously.
  • FE – Defrost time out

Fault codes for Indesit dishwashers

  • F10 – Fill or empty time out. Check that the hoses are not kinked, that the taps are on or whether the drain pump or hose is blocked.
  • F11 – Heater timed out. The heater has not reached the required level.
  • F20 – Temperature under range.
  • F21 – Temperature over range.

Fault codes for Indesit LCD dishwasher models

  • A01 – Float switch operated.
  • A02 – Open/Short circuit heater relay.
  • A03 – Short circuit on thermistor.
  • A04 – Unable to reach or sense temperature within 70 minutes.
  • A05 – Pressure switch has not been reset.
  • A07 – Open/Short circuit wash motor triac.
  • A08 – Open/Short circuit auxiliary wash motor triac.
  • A09 – Open/Short circuit with main wash triac.
  • A10 – Open/Short circuit fill valve triac.
  • A11 – Half load valve triac or alternating motor action.
  • A12 – Open circuit heater rely.
  • A13 – Open/Short circuit dispenser triac.
  • A14 – Drain hose too low causing syphoning. Check drain hose and re-adjust.
  • H20 – Check tap and pressure of incoming water.

Fault codes for Indesit LCD tumble dryers

  • F01 – Short circuit motor triac.
  • F02 – Motor jammed or fan blocked.
  • F03 – Front thermistor open/short circuit.
  • F04 – No pump piloting.
  • F05 – No feedback from the pump.
  • F08 – Static heater relay with contact welded closed.
  • F09 – Eprom is not programmed or not functioning.
  • F10 – Common of heater open or one shot open.
  • F11 – No pump connection.
  • F12 – Communication error between boards.
  • F13 – Rear thermistor open/short circuit.
  • F15 – Dynamic heater relay with contact welded closed.
  • F-17 – Mater relay welded closed.

Fault codes for Indesit LCD EVO1 Washing machines and washer dryers

  • F01 – Short circuit motor triac.
  • F02 – Motor jammed tacho detached.
  • F03 – Wash thermistor open/short circuit.
  • F04 – Pressure switch jammed on empty.
  • F05 – Pressure switch jammed on full.
  • F06 – Program selector error.
  • F07 – Heater relay stuck.
  • F08 – Heater relay cannot be activated.
  • F09 – Incompatible Eprom.
  • F10 – Pressure switch not sensing correctly.
  • F11 – Pump cannot be activated.
  • F12 – Communication error.
  • F13 – Dryer fan or dryer thermistor faulty.
  • F14 – Dryer element faulty.
  • F15 – Dryer element relay faulty.
  • H20 – Not fillings. Check tap, hose and inlet valves.
  • LOCKED – Check interlock.

Fault codes for Indesit LCD EVO2 and V4 washing machines and washer dryers

  • F01 – Motor triac short circuit.
  • F02 – Motor jammed or tacho detached.
  • F03 – Wash thermistor open/short circuit.
  • F04 – Pressure switch jammed on empty.
  • F05 – Pressure switch jammed on full – Check pump for blockages.
  • F07 – Heater relay stuck.
  • F08 – Heater relay stuck.
  • F09 – Setup error.
  • F10 – Pressure switch not sensing.
  • F11 – Pump cannot be activated.
  • F12 – No communication between cards.
  • F13 – Drying thermistor open/short circuit.
  • F14 – Drying element faulty.
  • F15 – Dryer element relay fault.
  • F17 – Interlock error.
  • F18 – Communication error.
  • H20 – Not filling. Check tap, hose and inlet valves.

Fault codes for Indesit tumble dryers

  • F1 – The level of required dryness has not been reached within the time period. Check that the correct programme has been selected.
  • F2 – Thermistor or sensing circuit failure.
  • F3 – Heater plate over temperature. Check the filter and vent hose for a possible blockage.

These fault codes might possibly apply to the following models. They’re sorted by alphabetical order, so find the first letter of your model number and jump straight to that section:

B

B339NF, B33FNF, B33FNFP, B33FNFX, BA12, BA12S, BA13, BA139, BA139S, BA13GF, BA13S, BA13X, BA33FNF, BA35FNFP, BA35FNFPS, BA35P, BAA35P, BAAN10, BAAN10S, BAAN10W, BAAN12, BAAN12S, BAAN12W, BAAN134, BAAN134G, BAAN134PS, BAAN134S, BAAN134SS, BAAN134W, BAAN134X, BAN12NF, BAN12NFS, BAN12NFW, BAN134NF, BAN134NFG, BAN134NFS, BAN144NF, BAN144NFS

C

C133, C133, C138, C138, C138IX, C139, C239NF, C239NF, CA133L, CA138, CA138IX, CA223, CA233, CA238, CA238, CA239, CA239, CA239V, CA240, CE239V, CG1230, CG1230, CG1230I, CG1268, CG1269NF, CG1269NF, CG1304SI, CG1304WH, CG1305NF, CG1305NF, CG1318, CGA1380, CGA1380, CGA1381

D

D41, D41, D61, D61, D61D, D63, D63G, D63S, D63S, D64, D64, D64RF, D66S, DE43, DE43, DE72, DE73, DE73, DG6100WG, DG6100WG, DG6109S, DG6109S, DG6109WG, DG6145WG, DG6145WG, DG6300WG, DG6300WG, DG6450W, DG6450WG, DI450UK, DI450UK, DI62, DI620, DI65, DI67, DI67, DI67S, DIF04A, DIF04UK, DIF16A, DIF16AUK, DIS04, DIS04UK, DP1TCIX, DP2GSIX, DP2RIX, DPG15IX, DPG15WH, DV61BR, DV61IX, DV61WH, DV61WH, DV620BK, DV620IX, DV620IX, DV620W, DV620WH, DV62BK, DV62BK, DV62IX, DV62IX, DV62SS, DV62WH, DV62WH, DVG622KBK, DVG622KIX, DVG622KWH

E

E604W, E604X

F

F1M1RGN, F1M1RWH, FB36WH, FC88CIX, FC88CIX, FDE10K, FDE10KIX, FDE10KSS, FDE10KWH, FDE1BR, FDE1RGN, FDE1WH, FDE1WH, FDE20IX, FDE20IX, FDE20WH, FDU20IX, FDU20WH, FE10BK, FE10BK, FE10BR, FE10BR, FE10KBK, FE10KCBK, FE10KCWH, FE10KWH, FE10WH, FE10WH, FG10KBK, FG10KBK, FG10KSS, FG10KWH, FG10KWH, FG1BR, FG1WH, FG1WH, FI21KBBK, FI21KBIX, FI21KBWH, FI31KBBK, FI31KBIX, FI31KBWH, FID20BK, FID20BK1, FID20IX, FID20IX1, FID20K, FID20WH, FID20WH1, FID20X, FIDM20IX, FIDM20IX1, FIDM20X, FIE36KBBK, FIE36KBIX, FIE36KBWH, FIE56KBBK, FIE56KBIX, FIE56KBWH, FIE76GPKAIX, FIE76KCA, FIE76PKAIX, FIU20BK, FIU20I, FIU20IX, FIU20IX1, FIU20K, FIU20W, FIU20WH, FIU20WH1, FIU20X, FM10KAN, FM10KGR, FM10KRAN, FM10KRGR, FM10KRWH, FM10KWH, FM10RKAN, FM10RKGR, FM10RKWH, FM1IX, FM1IX, FM1RAN, FM1RGR, FM1RWH, FM1RWH, FM20KCIX, FM20KIX, FM20KRWH, FM20KSS, FM20KSS, FM70P, FM70PM, FV10IX, FV10KBIX, FV10KIX, FV10KSS, FV1BR, FV1BR, FV1WH, FV1WH, FV20KBK, FV20KBR, FV20KBWH, FV20KWH, FV20WH

G

G31VU, G32V, G32V, G32VS, G510V, G510V, G511IX, G511V, G511V, G70, G71, G71, G73V, G73VU, G74C, G74V, G74VS, G75C, G75CS, G85C, GF4114, GF4218, GF4264, GS164I, GS164IUK, GSE160, GSE160, GSF120, GSF120, GSF120I, GSF120UK, GSF120UK, GSF4100, GSF4100, GSF4100I, GSF4200, GSF4300, GSFV4100, GSV120, GSV4100

H

H1612BK, H1612IX, H1612WH, H161BK, H161IX, H161WH, H360IX, H361BK, H361FBK, H361FIX, H391FIX, H391IX, H511IX, H561IX, H562IX, H563IX, H571IX, H572IX, H573IX, H5911IX, H591IX, H592IX, H593IX, H6611GY, H661GY, HI160AN, HI160BK, HI160BR, HI160BR, HI160GN, HI160GN, HI160GR, HI160IX, HI160IX, HI160SS, HI160WH, HI160WH, HI260BR, HI260BR, HI260WH, HI260WH, HI561, HI561IX, HI591, HI591IX, HIP6FIX, HIP6IX, HIP9FIX

I

IDC75, IDC75S, IDCA835, IDCA835S, IDCE845, IDCE845S, IDE1000, IDE10002, IDE1005S, IDE1005S2, IDE105S, IDE44, IDE750, IDF125, IDF125S, IDL40, IDL40, IDL40C, IDL40S, IDL40S, IDL40SC, IDL500, IDL500, IDL5002, IDL505S, IDL505S, IDL530, IDL530, IDL535S, IDL700, IDL700W, IDL705S, IDL705S, IDL730, IDL735, IDL735S, IDL750, IDP127, IDP127NX, IDP148, IDS105, IDS105S, IDTM, IDV65, IDV65S, IDVA735, IDVA735S, IF51KAIXUK, IF63KAANUK, IF63KAIXUK, IF89KAIXUK, IF89KAWHUK, IF89KGPAIXUK, INC265AI, INC265AL, INC310, INC3100, INC3100G, INC3100GUK, INC3100UK, INC325AI, INC325AIUK, INCB310, INCB320, INCB320AI, INCB320AIUK, INCB320GB, INCB320IUK, INCH310, INCH310AAVEI, INE160G, INE160G, INE160GUK, INF140G, INF140G, INF140GUK, INF1411G, INFS1211, INS1610, INS1611GUK, INTS1610UK, INTS1611, INTSZ1610UK, INTSZ1611, IP640SIXUK, IP640SWHUK, IP641SC, IP641SCIX, IP751SC, IS31V, IS31VS, IS31VU, IS60V, IS60V, IS60VS, IS60VU, IS70C, IS70C, IS70CS, ISA60V, ISL60V, ISL70C, ISL70C, IWB5113, IWB5123, IWB6113, IWC6125, IWC6125S, IWC6145, IWC6145S, IWC6165, IWC6165S, IWDC6105, IWDC6125, IWDC6125S, IWDE12, IWDE126UK, IWDE7125B, IWDE7125S, IWDE7145B, IWDE7145S, IWE7145B, IWE7145S, IWE7168B, IWE7168S, IWME12, IWME126UK

K

K300EXG, K300EXG, K301ECXG, K301EXG, K301EXG, K30EWG, K30EWG, K31ECWG, K31EWG, K340GWG, K341GWG, K341GWG, K342EXG, K342EXG, K342GXG, K342GXG, K344ECXG, K344EXG, K344EXG, K344GXG, K344GXG, K34GWG, K34GWG, K3C36XG, K3C8VAG, K3C8VWG, K3C8VXG, K3E11XG, K3E1AIR, K3E1WG, K3G11SXG, K3G11XG, K3G21SXIR, K3G21XG, K3G2SWG, K3G2WG, K600V9W, K600VWG, K601VCWG, K601VWG, K601VWG, K642GSG, K642GSX, K642GSX, K642GSXG, K642GWG, K642GWG, K642RGSX, K642RGSXG, K642RVSX, K642RVSXG, K642VSX, K642VSX, K6432GXG, K645GWG, K645GXG, K645RGXG, K645RVCXG, K645RVXG, K645VCXG, K645VXG, K647RGXG, K647RVXG, K6C320WG, K6C320XG, K6C32W, K6C32WG, K6C32X, K6C32XG, K6C8PAG, K6C8PAG, K6E32W, K6E32WG, K6E32X, K6E32XG, K6G210SWG, K6G210SXG, K6G210WG, K6G210XG, K6G21W, K6G21WG, K6G21X, K6G21XG, K6G32W, K6G32WG, K6G32X, K6G32XG, K6G520SXG, K6G520WG, K6G520XG, K6G52W, K6G52WG, K6G52X, K6G52XG, KD341GW, KD3C11XG, KD3C1AG, KD3C1EW, KD3C1MG, KD3C1WG, KD3CEW, KD3E11XG, KD3E1AIR, KD3E1EW, KD3E1EW, KD3E1MG, KD3E1MGS, KD3E1WG, KD3G11SXG, KD3G11XG, KD3G21SLXIR, KD3G21SXIR, KD3G21XG, KD3G2AG, KD3G2MG, KD3G2SAIR, KD3G2SLAIR, KD3G2SLWIR, KD3G2SMG, KD3G2SWIR, KD3G2WG, KD640GW, KD641EM, KD641EW, KD641EX, KD641GM, KD641GW, KD641GX, KD643EW, KD643EX, KD643GW, KD643GX, KD6C0EW, KD6C35A, KD6C35M, KD6C35W, KD6C35X, KD6C7EM, KD6C7EW, KD6C7EX, KD6C8EW, KD6C8EX, KD6E35W, KD6G25A, KD6G25M, KD6G25SAIR, KD6G25SWIR, KD6G25SXIR, KD6G25W, KD6G25X, KD6G25XIR, KD6G35M, KD6G35W, KD6G35X, KDP60C, KDP60CX, KDP60E, KDP60EX, KDP60G, KDP60SE, KG3044BEG, KG3044BEG, KG3044WEG, KG3044WG, KG3044WGG, KG3407BGG, KG3407BGG, KG3407WG, KG3407WGG, KG5044WGG, KG5044WGG, KG5407WG, KG5407WGG, KG6044WG, KG6044WGG, KG6407AVG, KG6407GV, KG6407GVG, KG6407WGG, KG6407X, KG6407XG, KG6408WV, KG6408XV, KG6408XVG, KP100C, KP100CX, KP100GX, KP100I, KP100IX, KP59MSCXG, KP59MSXG, KP900CX, KP900GX, KP9507EBXG, KP9507G, KP9507XE, KP9507XG, KP9508CXG, KP9508EXC, KP9508EXG, KP9508EXG, KT6C3M, KT6C3W, KT6G2M, KT6G2W, KT6G2WIR

L

LS4510

M

MK64R, MK64RIX, MWI12IX, MWI14IX, MWI212IXUK

N

NBAA33NFNXD

O

O120, O120, OFNAA230, OFNAA305

P

P04AN, P04BR, P04BR, P04BRGB, P04GN, P04GR, P04IX, P04IXGB, P04WH, P04WH, P04WHGB, P40AAN, P40ABR, P40ABR, P40AGN, P40AGN, P40AIX, P40AIXGB, P40AWH, P40AWH, P604AAN, P604ABK, P604AGR, P604AIX, P604ANIND, P604ASS, P604AWH, P604BKIND, P604BRIND, P604GRIND, P604SS, P604SS, P604SSIND, P604WH, P604WHIND, P640AAN, P640ABK, P640AGR, P640AIX, P640ASS, P640ASS, P640AWH, PBAA33NFUK, PBAA33NFXD, PBAA34NFD, PI40AWH, PI604IX, PI604WH, PI640ABK, PI640AIX, PI640AK, PI640ASBK, PI640ASIX, PI640ASK, PI640ASWH, PI640AWH, PI640TCIX, PI750AST, PV04BR, PV04WH, PV604BK, PV604SS, PV604SS, PWC8128W, PWDC8125W, PWDE8128W, PWDE8148S, PWDE8148W, PWE8128W, PWE8148S, PWE8148W, PWE8168S

R

R24, R24S, R24SILVER, R29, R45, R45NF, R45NFS, R45S, R45SNF, R642VSXG, R647RGXG, RA24L, RA24S, RA25, RA28, RA29L, RG1140, RG1140, RG1140I, RG1142, RG1142, RG1142I, RG1160, RG1164, RG2190, RG2190, RG2250, RG2250, RG2251, RG2251BL, RG2251GR, RG2251RD, RG2251SI, RG2251SI, RG2251YE, RG2255, RG2450, RG2450, RG2450S, RG2450SI, RGA1300, RGA1300, RGA250, RGA250, RGA250I, RGA300, RGV1140, RGV1142

S

SAAN300, SAN300, SAN400, SAN400S, SIXL145, SIXL145BL, SIXL145D, SIXL145K, SIXL145S, SIXL145W

T

TA2, TA5, TA5FNF, TA5FNFS, TA5S, TAAN25, TFA1, TFA1S, TFA1SUK, TFA1UK, TK64SIX, TLA1, TLA1S, TLA1SUK, TLA1UK, TZA1, TZA1S

U

UFAAN300, UFAN300, UFAN400, UFAN400S

V

VIA640C, VRA640C, VRA640X, VRM640X

W

W101, W103, W103, W103RF, W113, W113, W123, W123, W123RF, W123S, W123S, W123SILVER, W123SRF, W133, W133, W133RF, W133S, W143, W143, W143S, W143S, W161, W83, W83, W83RF, W93, W93, WA105, WA105, WA115, WA115IND, WA125, WA135, WA135, WA155, WA155, WAX120, WAX120, WAX120JUM, WD10, WD10, WD10RF, WD11, WD11, WD12, WD12, WD12RF, WD12S, WD12S, WD12SILVER, WD12SRF, WD12X, WD12X, WD12XUK, WD14, WD14, WDA5711, WDE12, WDE12, WDG1095WG, WDG1095WG, WDG1195WG, WDG1195WG, WDG1295, WDG1295, WDG1295RF, WDS1000, WDS1000, WDS1000RF, WE10, WE10, WE11, WE12, WE12, WE12S, WE12S, WE12SILVER, WE13, WE13RF, WE14, WE14, WE14S, WE14S, WE14SILVER, WE16, WE16, WE16RF, WE16S, WE16SILVER, WE16SRF, WE21, WG103, WG1030G, WG1030G, WG1033G, WG1034G, WG1086G, WG113, WG1130D, WG1130TG, WG1130TG, WG113D, WG113D, WG1185WG, WG1185WG, WG123, WG1230G, WG1230G, WG1230GH, WG1230TG, WG1233TG, WG1234TG, WG1236TG, WG1239TG, WG1286S, WG1286S, WG1286WG, WG1286WG, WG1386WG, WG1430T, WG1432, WG1436T, WG1436TG, WG620G, WG820G, WG820G, WG833G, WG83G, WG9, WG920, WG920PG, WG924, WG93, WI101, WI101, WI121, WI121, WI141, WI141, WIA101, WIA101, WIA111, WIA111, WIA121, WIA121, WIB101, WIB111, WIDE127, WIDE127, WIDL102, WIDL102, WIDL126, WIDL126, WIDL126S, WIDL126S, WIDL146, WIDL146, WIDXE146, WIDXE146S, WIDXL102, WIDXL126, WIDXL126S, WIDXL146, WIE127, WIE127, WIE137S, WIE137S, WIE147, WIE147, WIE147TE, WIE157S, WIE157S, WIE167, WIE167, WIL103, WIL103, WIL113, WIL113, WIL123S, WIL123S, WIL123SILVER, WIL133, WIL133, WIL143, WIL143, WIL143S, WIL143S, WIL143SILVER, WIL144SP, WIL153, WIL153, WIL163, WIL163, WIL163S, WIL163S, WIL163SILVER, WIXE127, WIXE167, WIXL1200, WIXL1200OT, WIXL123, WIXL123S, WIXL126, WIXL143, WIXL143S, WIXL163, WIXL163S, WIXXE147, WIXXE147S, WIXXE167, WIXXE167S, WIXXL146, WM12, WM12UK, WM12X, WM12XUK, WMS1200TX, WMS1200TX

Comments

josh
Saturday, January 16, 2016 at 6:27 pm

hi i have noted the above and understand that the above also goes for the wd10uk i have had a problem i see F15 and F16 to do with high water levels, the kitchen flooded after the dryer came on ,i found that the program knob was turning round on its own ,the water continually filling and the pump not getting the water out, the module had burns to it so i ordered another one from unifit supposed to have been programmed ,but it wasn’t and it never had a chip in it, i put the chip in from the old one it blew the module, i ordered a new programmed chip module it blew again i found it strange that thee of the plug leads can fit the same areas i thought they were slotted only to fit the correct areas, anyway switching on the machine came on no mater where the program was the pump although working was not sending water out the pump was checked for clarity and hoses was checked and drain cleaned and the water was continually still coming in after the costs involved i have decide to get another machine but i would like to know why this machine became so problematic i dont even think that indesit knows since they have provided two different types of modules ant ideas thanks

Jeanette
Thursday, April 7, 2016 at 8:57 pm

My machines showes error code pr 14, but I cant find it??

Anne
Sunday, September 25, 2016 at 8:32 pm

My Indesit IWD6450 washing machine is showing an error H20?

Mistie McDonagh
Monday, August 6, 2018 at 5:02 pm

Hi I have the Indesit condensed dryer
model No. IDCE8450BH(UK)
It is currently flashing all lights and has the code F08 on the display screen
Does this mean it is broken or it there a simple way of fixing my dryer! I haven’t had it long!
A fast response would be helpful as I really need my dryer working!

Regards
Miss Mistie McDonagh

Jolanta
Monday, November 19, 2018 at 9:42 am

Indesit IDCEG45BH. . ERROR CODE H20

Steve
Tuesday, January 1, 2019 at 4:12 pm

I have error code E60 but I can not find it, there is also a little arrow lit up

Gemma
Sunday, March 24, 2019 at 6:14 pm

Anyone ever get the code FO8 with all led lights flashing?

MGlotech
Tuesday, April 2, 2019 at 6:11 pm

What was the model number?

Patrick W
Sunday, September 1, 2019 at 12:23 pm

Hi, I’ve got an F02 error on my washer-dryer on the very first day. I see it means a motor error or fan or tacho error. What do I need to do?

MGlotech
Sunday, September 1, 2019 at 2:26 pm

If it is brand new then you need to contact your retailer, they will tell you what to do. A plug could have become loose or detached in transit of there could be a faulty component.

MISS D L PASCOE
Wednesday, September 4, 2019 at 5:07 pm

I have a indeset XWD71252 WITH F12 ERROR WHAT DO I DO TO RESET IR FIX IT

MGlotech
Wednesday, September 4, 2019 at 5:10 pm

Most likely it is a communication error between boards, there is not much you can do yourself to fix this fault, you need an experienced engineer, otherwise you could end up spending well over £100 on a control board that is not needed. Also the boards on these probably need programming which you can’t do yourself.

Idowu
Monday, September 9, 2019 at 1:37 pm

I have error codes on three different machines f06:F18 and f13 old as a technician what do I do

MGlotech
Tuesday, September 10, 2019 at 7:52 am

The answer would be different on each product. Do you have the model numbers?
Also what do you mean be technician?

jackson
Saturday, September 14, 2019 at 9:52 am

I own an Indesit washingmachine model BWE 81683 WSSS. Having an error code F03 indication washer thermistor short fault. I have changed the thermostat with an other indesit original one also the connection wire plug. But the error returns again after several wash use most of the time it stays away for 3 to 4 use cycles but returns again. Is there any info on this? Maybe sometime software or mechanical related on this model? Any info or help very much appreciated.

jackson Braafhart
Saturday, September 14, 2019 at 1:04 pm

Having an error code F03 on a Indesit BWE 81683X WSSS. Which indicates a thermistor malfunction. Changed the unit and connection plug. After a few uses this error returns and wash cycle is not begin finalized so door has to be opens manually. Is this a known issue? Any help or information is appreciated.

MGlotech
Wednesday, September 18, 2019 at 2:21 pm

If the repair fixed the fault initially then it is odd. Make sure that the thermistor is still in the correct place also wiring and plug are not damaged and connected. You can test the thermistor by making sure there is a resistance reading on it and it is not short circuit or open circuit.
Other than this it could be a board fault but at this point you need to make sure you are not throwing money at the machine guessing what is wrong with it.

I am not aware of any known problems that could cause this.

MGlotech
Wednesday, September 18, 2019 at 2:25 pm

Only a service engineer could flash the board software on this machine as you need to order a smart card and have a reader. Even then the system is terrible and often doesn’t work. Indesit engineers do it through their laptop so van have loads of goes trying to fix it. The smart cards are single use so you need to buy a new one each time it doesn’t work.

For this reason I wouldn’t buy a Hotpoint or Indesit washing machine or washer dryer and there must be tens of thousands of these products in landfill unnecessarily.

Tony
Thursday, September 19, 2019 at 7:05 pm

Hi . I have a indesit washer dryer wd12 5 programmer keeps turning and door lock light flashes 3 times.. any help would be appreciated

MGlotech
Friday, September 20, 2019 at 8:44 am

Sounds like could be a temperature sensor NTC fault or there is a wiring problem on the back of the heater. Normally this fault is worth repairing but only attempt working on a product if you are competent and the appliance is disconnected from the mains.

MGlotech
Friday, September 20, 2019 at 8:47 am

You need to do an insulation test on the heater but to do that you need a test meter capable of it. A heater fault could cause this to happen.

Tony
Friday, September 20, 2019 at 12:12 pm

Thanks for the help guys. I’ll let you know how it goes later 👍

Remy
Wednesday, October 9, 2019 at 12:15 am

Indesit washing machine. Error code F01

MGlotech
Wednesday, October 9, 2019 at 10:17 am

That code is for a short circuit motor triac.
After thoroughly checking the motor for faults you will probably need to change the PCB. Be careful as if the motor is faulty it could blow the new PCB as soon as you fit it.

Anastasia
Monday, October 14, 2019 at 10:50 am

Hi , my tumble dryer keeps flashing red light saying that I have to empty the water collector/container. It stops every couple of minutes with this message. The water container is empty and it looks like all tubes/pipes behind the dryer are in place. Can you please advise? many thanks in advance!

MGlotech
Monday, October 14, 2019 at 10:58 am

If it is a dryer where you are emptying the water at the top of the appliance the first thing to check is that the water is pumping up to the top container. If you are emptying from a container at the bottom of the appliance then there could be something wrong with the float switch or sensor.
The problem is that the product thinks that the container is full or water is not being taken away from the place it naturally collects.

Anastasia
Monday, October 14, 2019 at 11:36 am

Hi , thank you for the quick response. My water container is at the top of the dryer. You are right, it doesn’t look like condensation/water drops going up to it through the pipe/tube. Any advice would be kindly appreciated!

Northerngeezer
Sunday, October 20, 2019 at 1:05 pm

Error code F06 on model EWD 71252 W UK

Benjamin Richards
Friday, October 25, 2019 at 4:10 pm

Hi, my Indesit IWME 127 model washing machine is flashing function button 2 and 4 simultaneously (bleaching and extra rinse symbols) along with the door lock flashing red. What could this be?

Mario
Friday, May 15, 2020 at 8:21 pm

We buy 1 month before new indesit tumbler dry mashine and she broken writing f04 and all lights flashing.

Mario
Friday, May 15, 2020 at 8:23 pm

Tumbler dryer mashine model are IDCE 8450 B H. And we not understand why new mashine broken max we used 20 times per all time when we buy

Kellie Jones
Tuesday, January 19, 2021 at 1:49 pm

Hi my indesit dryer says f08. What does it mean and is it repairable?

Thanks

Leave a Reply

Categories

Archives